| Product | Description | Temperature Range | Applications |
|---|---|---|---|
Heat Transfer Fluid |
|||
| ADDOTHERM ™ K-600 | Addotherm™ K-600 is a high performance synthetic heat transfer fluid specifically designed for use in non-pressurized, indirect, liquid heat transfer systems. |  |
► OIL AND GAS PRODUCING, ►NATURAL GAS ►, ASPHALT PROCESSING & STORAGE, ►GTL (Gas To Liquid), ►PLASTIC MOULDING, ►ORGANIC RANKINE CYCLE, ►BIO FUEL MANUFACTURING, ►FOOD & BEVERAGE PROCESSING, |
| ADDOTHERM ™ K-660 | ADDOTHERM™ K-660 is a high performance synthetic heat transfer fluid specifically designed for use in non- pressurized, indirect, Liquid heat transfer systems. With a pour point of only -33 ˚F (-27 ˚C), ADDOTHERM™ K660 is readily pumpable (i.e., exhibits a viscosity of < 400 cSt) at 41 ˚F (5 ˚C) insuring easy start uo under almost any conditions. |  |
► OIL AND GAS PRODUCING, ►REFINING, ►GTL (Gas To Liquid), ►PLASTICS & POLYMER , ►MANUFACTURING, ►SYNTHETIC FIBER ►MANUFACTURING, ►ORGANIC RANKINE CYCLE ►FOOD & BEVERAGE ►PROCESSING, ►PLASTIC MOLDING, ►SPECIALTY CHEMICAL , ►MANUFACTURING, ►CHEMICAL MANUFACTURING, ►CONCENTRATED SOLAR POWER, ►BIOFUEL MANUFACTURING, ►DESALINATION, |
| ADDOTHERM ™ K-680 | It’s a synthetic base heat Transfer Fluid, especially designed for use up to 360 °C (680 °F) in liquid phase systems with static pressure of about 2 bar at high operating temperature. |  |
►REFINING, ►CHEMICAL MANUFACTURING, |
| ADDOTHERM ™ K-600LT | ADDOTHERM ™ K-600 LT is a high performance synthetic heat transfer fluid specifically designed for use in non pressurized liquid heat transfer systems up to 351°F (177°C). It can also be used in a pressurized liquid or vapor phase system up to 600°F (316°C). |  |
►SYNTHETIC FIBER ►MANUFACTURING, ► PHARMACEUTICAL MANUFACTURING, ►SPECIALTY CHEMICAL , ►MANUFACTURING, ►ENVIRONMENTAL TEST CHAMBERS, |
| ADDOTHERM ™ K-A | ADDOTHERM™ K- A is synthetic base Heat Transfer Fluid and its the preferred product for a wide range of heat transfer operations. It may be used in the vapor phase or as a pressurized liquid between 15º to 400ºC (60º to 750ºF). |  |
►GTL (Gas To Liquid), ►SYNTHETIC FIBER MANUFACTURING, ►BIOFUEL MANUFACTURING, ►CONCENTRATED SOLAR POWER, ►CHEMICAL MANUFACTURING, |
| ADDOTHERM ™ K-FG | It is synthetic base, a food grade Heat Transfer Fluid recommended for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk temperature up to 326˚C (617°F). | ►GTL (Gas To Liquid), ►SYNTHETIC FIBER MANUFACTURING, ►BIOFUEL MANUFACTURING, ►CONCENTRATED SOLAR POWER, ►CHEMICAL MANUFACTURING, | |
| ADDOTHERM ™ K-FQ | It’s a synthetic base heat Transfer Fluid, especially designed for the use up to 330 ° heat transfer fluid contains a mixture of diphenylethane and alkylated aromatics. Compared to hot oils, it exhibits better thermal stability, particularly at the upper end of hot oil’s use range, and significantly better low-temperature pumpability. |  |
►OIL & GAS, ►CHEMICAL PROCESSING, ►HEAT RECOVERY, |
| ADDOTHERM ™ K-SAT | ADDOTHERM ™ K-SAT is a synthetic base, High performance, very high thermal stable Heat Transfer Fluid, designed for the use in non-pressurized systems up to 350 °C (662°F) with maximum film Temperature of 375°C (710°F). |  |
►OIL & GAS, ►HEAT RECOVERY, ►PLASTICS & CHEMICAL PROCESSING, |
| ADDOTHERM ™ K- Flushing Fluid | It is a mixture of synthetic hydrocarbon, very stable compounds, with a high flash point and high initial boiling point. It is a “super solvent” we recommend be used prior to fluid replacement. The Flushing Fluid will dissolve tars and residues within the system and improve the use-life of subsequently charged heat transfer fluids and heat transfer efficiency when the system is brought back on-line. | ►OIL AND GAS PRODUCING, ►REFINING, ►GTL (Gas To Liquid), ►PLASTICS & POLYMER , ►MANUFACTURING, ►SYNTHETIC FIBER MANUFACTURING, ►ORGANIC RANKINE CYCLE ►FOOD & BEVERAGE PROCESSING, ►PLASTIC MOLDING, ►SPECIALTY CHEMICAL , ►MANUFACTURING, ►CHEMICAL MANUFACTURING, ►CONCENTRATED SOLAR POWER, ►BIOFUEL MANUFACTURING, ►DESALINATION, | |
